Tire Hardware Store
-
Price range: $79.99 through $88.38
The Wide 5 Wheel Adapter by A-1 Products allows easy conversion from a 5 x 4.75, 5 x 5, or 5 x 5.5 hub bolt pattern to a Wide 5 wheel bolt pattern, making it versatile for a range of setups. Made from lightweight yet durable aluminum with a natural finish, this adapter is 3/8-inch thick to provide a stable connection while keeping additional weight to a minimum.
-
$3.89
Enhance your Ford Dually with our 23° Valve Stem, 2.32″ length, 0.453″ hole, and 25-45 in. lbs. torque. Chrome finish for durability and style.
(Compatible Part Numbers: VS-962WZ / TR416-20)
-
$5.89
Equip your shop with the Hamaton TPMS Metal Valve Kit for CONTI-VDO Sensors, including all essentials for TPMS servicing. OEM compliant, universal fit.
(Comparable Part Numbers: 72-20-482, 5628580, 21117, 5628475, VS-70, 591326, MYR-V053_10)
-
Original price was: $289.97.$199.97Current price is: $199.97.
Fine-tune your suspension setup with the HOWE Coil Over Spring Pre-Load Cage. Engineered to allow independent preload adjustment on 3” x 10” coilover springs. Designed for racers and performance builders who demand precision suspension tuning, this aluminum spring cage improves traction, handling balance, and shock serviceability.
Constructed from lightweight, high-strength aluminum with a polished finish, this preload cage allows you to preload the coil spring independently of the shock body. This enables the use of softer spring rates while maintaining proper ride height—resulting in increased mechanical grip and improved compliance over rough terrain.
-
$145.97
Unlock stronger low-end torque and improved throttle response with the AIRAID PowerAid Throttle Body Spacer, designed for 1994–2003 Dodge Ram 1500 and 2500 trucks equipped with the 3.9L V6, 5.2L V8, and 5.9L V8 Magnum engines.
Featuring AIRAID’s patented Helix Bore™ design, this 1-inch spacer creates a controlled spinning airflow as it enters the intake manifold. This vortex effect increases air velocity and improves air/fuel atomization, resulting in noticeable gains in torque from approximately 800 RPM to 3,000 RPM — right where trucks need it most for towing, daily driving, and off-the-line acceleration.
-
Price range: $87.95 through $235.73
The Cometic Multi-Layer Steel (MLS) Cylinder Head Gasket is engineered for high-performance Chevrolet Gen-1 Small Block V8 engines, delivering superior sealing strength for street, strip, and race applications. Designed for 18° and 23° cylinder heads with a 4.200″ bore, this gasket is ideal for performance builds requiring reliability under high compression and boost.
-
Price range: $59.97 through $75.97
Clear Vision. Perfect Fit. Built for SA2020 Performance.
The G-Force R17 Shield is a direct replacement for Rift, Rift Carbon, Revo, and Revo Carbon helmets in the SA2020 series. Designed for high-visibility and impact resistance, this shield restores the optical clarity and safety your racing helmet was built to deliver.
-
$89.99
The Allstar Performance Aluminum Fan Shroud is engineered to maximize cooling performance by optimizing airflow across your radiator. Measuring 23″ wide x 19″ tall x 9.75″ deep, this shroud is designed to accommodate fans up to 17″ in diameter and radiators with an outside tank dimension of 28″.
-
$249.99
The Allstar Performance Aluminum Dirt Late Model Rear Spoiler is purpose-built for serious racers demanding superior aerodynamic performance and durability. Constructed from black powder-coated aluminum, this adjustable 2-piece spoiler features a smart unequal-length blade design—16″ + 56″ laser-cut sections—that increases right rear downforce and adds resilience during right-side impacts.
-
$188.97
Factory-Correct. Concours-Approved. Built for Boss-Level Style.
Bring your classic Mustang back to showroom glory with the Scott Drake Concours Rear Spoiler Assembly, a precise reproduction of the original factory rear spoiler found on 1969-1970 Boss 302 and Mach 1 Mustangs. Designed by Drake Automotive Group, this spoiler delivers authentic OEM styling with modern durability.
-
$168.97
Push your performance to the limit with ultra-durable Dominator Plastic Late Model Rear Spoiler Kit – built for serious Dirt Late Model racers.
This 2-piece, 72″ x 8″ adjustable spoiler is engineered from color-matched, impact-resistant plastic that outperforms aluminum, especially where it counts most—in crashes. Whether you’re battling through the pack or holding the lead, Dominator’s spoiler delivers consistent downforce, race after race.
-
Original price was: $187.97.$179.99Current price is: $179.99.
Restore smooth differential operation and replace worn or damaged components with the Motive Gear Spider Gear Kit for GM 8.625” (10-bolt) open rear differentials. This complete carrier gear set includes the spider gears, pinion shaft, thrust washers, and hardware needed to rebuild or service your differential with confidence.
-
$367.99
Boost your Ram’s power and performance with the legendary K&N 57 Series FIPK Cold Air Intake. Specifically engineered for the 5.7L HEMI V8, this system replaces your restrictive factory air intake with a high-flow, dyno-tested design that improves horsepower and torque.
-
Original price was: $81.79.$77.89Current price is: $77.89.
Upgrade your vehicle’s performance and save money long-term with the K&N High-Flow Lifetime Engine Air Filter. Designed as a direct replacement for your factory paper filter, this reusable cotton gauze filter improves airflow, boosts horsepower, and lasts for the life of your vehicle.
-
Original price was: $578.97.$519.99Current price is: $519.99.
Unleash your Jeep’s true sound and performance. The Gibson Axle-Back Dual Cat-Back Performance Exhaust is engineered to enhance your Grand Cherokee’s power, style, and exhaust tone. Built with dyno-tested tuning and a bolt-on design, it delivers horsepower gains and an aggressive tone without any cutting or welding.
-
$192.99
Unlock serious street power and protection with Royal Purple® HPS® 10W-40, the synthetic motor oil engineered for high-performance and modified engines. Designed for vehicles outside factory warranty, HPS is fortified with high zinc/phosphorus additives and Synerlec® technology to deliver unmatched protection, horsepower, and longevity under the most demanding conditions.
Enhance your Ford Dually with our 23° Valve Stem, 2.32″ length, 0.453″ hole, and 25-45 in. lbs. torque. Chrome finish for durability and style.
(Compatible Part Numbers: VS-962WZ / TR416-20)
The Mickey Thompson UHP Street Comp Tire offers high-performance handling, durability, and style, making it the ultimate choice for street enthusiasts. Designed for modern sports cars, this tire delivers exceptional grip, stability, and control at high speeds.
The Aero Series-52 Rolled Shell Tabbed Non-Beadlock Race Wheel is engineered for performance and compliance with 2018 UMP and IMCA mud cover mounting regulations. This 15 x 8-inch steel wheel features integrated tabs for direct mud cover mounting, offering racers a seamless and reliable solution.
Optimize tire inflation and accuracy with the Quick-Fill Digital Tire Pressure Gauge by LONGACRE. Designed for fast and precise tire filling, this tool connects directly to your air line and measures pressures up to 60 PSI in 0.1 PSI increments. The large 2-1/2-inch red digital face with a green backlight ensures excellent readability in all lighting conditions.
The Allstar Performance Adjustable Bead Breaker makes quick work of breaking down even the most stubborn tire beads on 10″, 13″, and 15″ wheels. Built with heavy-duty steel and finished in durable black powder coat, this tool is designed for long-lasting performance and can withstand frequent use. The adjustable arm allows easy switching between different wheel sizes, making it a versatile tool for professional mechanics and DIY enthusiasts alike.
The Gorilla Cragar SST Open End Lug Nuts set includes 60 high-quality lug nuts designed for Cragar wheels. Each lug nut features a 7/16-20 right-hand thread, a 13/16-inch hex head, and a 1.380-inch shank length to fit securely in place. These open-end lug nuts have a 0.685-inch shank diameter and are crafted from durable steel with a sleek chrome-plated finish for corrosion resistance and a polished appearance. This set also includes matching washers, ensuring a snug fit and preventing wheel damage. Ideal for Cragar SST wheels, these lug nuts deliver reliability and style in one kit.
The Gorilla Duplex Mag Wheel Washers set provides 100 high-quality washers for use with duplex mag lug nuts, ensuring a secure and stable fitment. Each washer has a 0.750-inch inner diameter and a 1.125-inch outer diameter, with a 0.120-inch thickness that creates a snug fit and prevents wheel damage. Constructed from durable steel with a protective zinc oxide finish, these washers resist corrosion for long-lasting performance. Ideal for custom and aftermarket wheels, these Gorilla washers add essential support, aligning and protecting wheels during installation.
The Groove Wheel (Black) by American Racing Wheels combines performance and sleek styling. It is the perfect choice for drivers who demand both form and function. This one-piece aluminum wheel, available in different sizes/bolt patterns, delivers durability and strength by design. The black painted center and natural machined lip offer a striking contrast, enhancing your vehicle’s appearance.
Discover the Bestpatch Best Radial Repair Patch CRP10: A durable solution for tire repair on cars, heavy-duty trucks, and more for a permanent fix!
