-
$189.99
Upgrade your tire setup with the Chrome Valve Stems by ALLSTAR PERFORMANCE. Designed for durability and reliability, this set of 50 bolt-on valve stems is ideal for various applications, from racing to everyday driving.
-
$119.99
Streamline tire pressure management with the Quick Disconnects by Allstar Performance. Allstar Performance specifically designs this set of four high-quality aluminum tire pressure relief valves to fit 5/8-inch diameter wheel valve stem holes, making them ideal for use with center reliefs and Schrader valves. Built for durability and performance, these quick disconnects are perfect for racing, off-road, and other demanding applications.
-
$1.29
The Valve Extension Holder is an essential accessory designed to securely hold flexible valve extensions in place, preventing them from moving or flopping while driving. Ideal for use with braided or rubber valve extensions, this hardware ensures that your extension stays stable, allowing for easy access and safe operation during tire pressure checks.
-
Price range: $5.99 through $9.19
Ensure easy tire pressure access with the Stainless Steel Braided Flexible Valve Extension. They offer durability and convenience for your vehicle’s tires. This high-quality valve extension is made with a flexible rubber core encased in a tough stainless steel braided exterior, providing the strength needed for long-lasting use in demanding conditions.
-
Price range: $17.79 through $18.59
The Air-Flexx® Valve Extension is a high-performance solution designed to simplify tire pressure checks for inner dual tires and single wheels with hubcaps. At the same time it enhances safety and efficiency. Manufactured in Germany with top-quality materials, this innovative valve extension boasts a multi-layered construction. It combines stainless steel wire with durable polycarbonate to offer unmatched flexibility and resilience. Available in three lengths: 5 11/16″, 7 1/4″, or 8 7/16″.
-
$5.99
Replace/upgrade your tire pressure monitoring system with the Hamaton Aluminum TPMS Service Kit designed for TRW Ram TPMS sensors. This high-quality kit includes an aluminum clamp-in valve stem, specifically engineered to fit .625-inch rim holes, ensuring a secure and airtight seal. Each kit also comes with a durable valve cap and screw to easily attach the valve stem to the sensor, making it the perfect replacement for your original equipment.
-
$44.75
Get the our Double Seal Valve Cap (also referred to as gator caps): 100% leak-tested, fleet-approved, with high flow rate for pressure service. Box of 50, chrome finish.
(Comparable Part Number: 6541-N / 6541-A / 2-706A)
-
$11.79
Protect GM TPMS sensors with Long Skirt Plastic Valve Caps. Sold in 100s, they prevent dirt build-up and fit TR20008 snap-in valves. Durable, easy-fit.
(Comparable Part Number: TI114 / 2-158
-
$2.99
Ensure airtight tire maintenance with our 60° High Heat Grommet Truck Valve for aluminum wheels, fitting 0.390″ holes. Nickel-plated for durability and easy use.
(Comparable Part Numbers: VS-555-D / TR555D / TRI555D)
-
$92.00
Enhance tire maintenance with our Double Seal Valve Cap (also referred to as gator caps), adding ½” to your valve for easy access and double protection against leaks and dirt.
(Comparable Part Number: DS-1)
-
$0.97
Durable 7/8″ Snap-in Rubber Valve Stem fits 0.453″ holes, supports 65 psi, and ensures airtight performance for secure tire maintenance.
(Compatible Part Numbers: TRI412)
-
$14.79
Secure and durable Metal Valve Caps for Trucks: Nickel-plated, easy to install, long dome design for perfect seal. Sold in packs of 100. Ideal for all trucks.
-
$5.88
Keep dirt and dust from your tire valves with our Plastic Valve Caps, sold in bags of 100. Easy to use, durable, and perfect for all vehicles.
(Comparable Part Number: VHICAPS)
-
$8.99
Keep tire pressure intact with our Grey O’Ring Seal TPMS Valve Caps, easy to use and perfect for TPMS, in a bulk pack of 100 for long-term use.
(Comparable Part Number: TR25306 / 2-128)
-
$2.39
Upgrade with our 3.75″ Brass Valve Stem for a perfect, leak-proof fit in 0.625″ rim holes. Easy install, corrosion-resistant, and durable for all vehicles.
(Compatible Part Numbers: VS-572-R / TR572 / TRI572 / VS-572-WZA)
-
$2.69
Upgrade with our High Heat O-Ring 60 Degree Clamp-In Valve: Ni-plated for durability, 0.390″ hole size, ensuring easy installation and a perfect fit.
(Comparable Part Numbers: VS-545-D / TRI545D)
Enhance your Ford Dually with our 23° Valve Stem, 2.32″ length, 0.453″ hole, and 25-45 in. lbs. torque. Chrome finish for durability and style.
(Compatible Part Numbers: VS-962WZ / TR416-20)
Upgrade with a 1.25″ Rubber Snap-In Tire Valve Stem for easy installation, fitting most wheels with a 0.453″ hole and supporting up to 65 psi.
(Comparable Part Numbers: Dill T-13-R / TR413 / TRI413)
Upgrade with our 4 3/8″ Brass Valve Stem for steel wheels. High temp & ozone resistant, fits .625″ hole. Durable, precise fit for secure tire maintenance.
(Compatible Part Numbers: VS-573-R / TR573 / VS-573 / TRI573 / VS-573-WZA)
Upgrade with our Alcoa 5.5″ 90 Degree Heavy Duty Truck Valve for .625″ rim holes. Ensures durable, leak-proof performance for optimal tire maintenance.
(Part Numbers: VS-879-RW / TRI510)
Upgrade to our High Pressure Snap-In Rubber Valve Stem 1.27″ (TR600HP) for .453″ holes. Supports up to 80 psi for optimal tire performance and safety.
(Comparable Part Numbers: Dill E-600-D / E-600-WZ / TR600HP / VHI600HP / TRI600HP)
